Takeuchi TB230

Compact Excavators TB230

Double tap to zoom

 

Features

With a width of under five feet the Takeuchi TB230 is narrow enough to work on jobsites with limited access and the conventional design provides excellent stability, comfort, and working range.

ENGINE

  • EPA Final Tier 4 Compliant 
  • Automatic Fuel Bleed System
  • Extended Life Coolant
  • Dual Element Air Filter
  • Automatic Idle

ELECTRICAL

  • Coolant Temperature and Fuel Level Gauge
  • Audible and/or Visual Indicators for Battery Voltage, Engine Oil Pressure, Engine Collant Temperature, Air Filter Restriction Indicator, High Speed Travel, Engine Preheat, One-Touch Idle
  • 12 Volt System with 40 Amp Alternator
  • Multi-function Switch Bank
  • Work Lights: Boom, Side Cover
  • Engine Preheat
  • Hour Meter
  • Travel Alarm

UNDERCARRIAGE AND FRAME

  • Triple Flanged Track Rollers
  • Sloped Frame with Open Centers
  • Two-Speed Travel with Automatic Shift
  • Heavy Duty Dozer Blade with Float
  • Cast Iron Wrap Around Protective Counterweight
  • 11.8" Rubber Tracks
  • Available Power Angle Blade with Float and Bolt On Cutting Edge that Angles 25° Right and Left

HYDRAULIC

  • Cushioned Boom and Swing Cylinders
  • Precise and Responsive Pilot Controls
  • Proportional Slide Switch Controller for Auxiliary Circuit
  • Large Hydraulic reservoir with fluid level sight gauge
  • Auxiliary Hydraulic Circuit Plumbed to Arm
  • Selectable One-Way and Two-Way Auxiliary Operation
  • Auxiliary Detent (Primary Circuit)
  • Pilot Accumulator
  • Large Hydraulic Reservoir with Fluid Level Sight Gauge

WORKING EQUIPMENT

  • Main Boom Cylinder Guard
  • Long Arm with Integrated Thumb Mount
  • Available Dual Pin Position Bucket
  • Available Mechanical Bucket Quick Coupler
  • Available Main Pin Hydraulic Thumb

OPERATOR'S STATION

  • ROPS / TOPS / FOPS Four Post Canopy
  • Deluxe High Back Suspension Seat
  • Adjustable Arm Rests
  • Quick Change Control Pattern (ISO or SAE)
  • 2" Retractable Seat Belt
  • Available 3" Rectractable Seat Belt

Specifications

 OPERATING PERFORMANCE
Operating Weight Canopy 6,360 lbs (2,885 kg)
Maximum Digging Depth 9 ft 3.6 in (2,835 mm)
Maximum Dump Height 10 ft 7.2 in (3,230 mm)
Maximum Reach 15 ft 10.9 in (4,850 mm)
Maximum Bucket Breakout Force 6,471 lbs (2,935 kg)
Maximum Arm Digging Force 2,900 lbs (1,325 kg)
Arm Length 4 ft 9 in (1,445 mm)
Slew speed 10.3 rpm
Traction Force 6,340 lbs (2,876 kg)
ENGINE  
Make/Model  Yanmar / 3TNV88F
Tier Rating EPA Final Tier 4
Cylinders/Displacement  3 / 81.0 cu in (1.3 L)
Horsepower  24.4 hp (18.2 kW)
Rated Engine Speed  2,400 rpm
Maximum Torque  63.0 ft-lb @ 1,440 rpm (85.3 Nm)
Engine Lubrication  5.0 qt (4.7 L)
Cooling System  4.2 qt (4.0 L)
Fuel Tank Capacity  14.0 gal (53.0 L)
Fuel Consumption (65% of full load)  0.8 gal / hr (3.3 L / hr)
Electrical System  12 volts / 40 amps
UNDERCARRIAGE  
Traction Drive Type    Planetary Reduction w/ Automatic Shift
Parking Brake Spring Applied, Hydraulically Released
Track Roller Type Permanently Sealed, Triple Flanged Rollers
Track Rollers  3 per side
Track Width  11.8 in (300 mm)
Track Ground Contact Length  4 ft 8.7 in (1,440 mm)
Ground Pressure 4.3 psi (29.6 kPa)
Maximum Travel Speed  
     Low Range 1.8 mph (2.9 km/hr)
     High Range 3.2 mph (5.2 km/hr)
HYDRAULIC SYSTEM  
Pump Type Two Piston Pumps w/ Two Gear Pumps
Total Hydraulic Flow  24.2 gal / min (91.6 L)
Primary Auxiliary Hydraulic Flow   13.4 gal / min (50.6 L / min)
System Operating Pressure  3,046 psi (21 MPa)
Hydraulic Reservoir Capacity  9.2 gal (35.0 L)
Hydraulic System Capacity  14.8 gal (56.0 L)
DIMENSIONS  
Maximum Dig Depth  9 ft 3.6 in (2,835 mm)
Maximum Dump Height  10 ft 7.2 in (3,230 mm)
Maximum Reach Ground Level  15 ft 5.4 in (4,710 mm)
Maximum Vertical Dig Depth 7 ft 0.8 in (2,153 mm)
Overall Width  4 ft 9.5 in (1,460 mm)
Transport Height  8 ft 3.9 in (2,540 mm)
Transport Length  15 ft 0.9 in (4,595 mm)
Ground Clearance  11.9 in (305 mm)
Dozer Blade Height 11.8 in (300 mm)
Independent Boom Swing Angle  78° Left / 58° Right
Minimum Front Swing Radius (Straight) 6 ft 2.7 in (1,895 mm)
Minimum Front Swing Radius (Offset)  4 ft 11.2 in (1,505 mm)
Tail Swing Radius 4 ft 4.4 in (1,330 mm)