Takeuchi TS70R

Skid Steer Loaders TS70R

Double tap to zoom

 

Features

The TS70R is a large frame skid steer with a radial lift loader that is built for the most demanding applications. The pilot operated joysticks provide greater control and the turbocharged engine delivers the power and performance required for those tough jobs.

ENGINE

  • EPA Interim Tier 4 Compliant
  • Turbocharged
  • Engine Driven Fan
  • Swing Out Cooling Module
  • Dual Element Air Filter
  • Available Engine Block Heater

ELECTRICAL

  • Machine Monitoring System w/ Tachometer, Fuel and Coolant Temperature Gauges
  • 12 volt System with 90 amp Alternator
  • Halogen Work Lights: Front and Rear
  • Hour Meter
  • Back-up Alarm

DRIVE TRAIN AND FRAME

  • Mechanical Faced Axle Seals
  • Hydrostatic Drive System
  • 100 ANSI Chain
  • Offset Wheels are Reversible for Narrow or Wide Stance
  • Heavy Duty Tires
  • Available Over the Tire Tracks (OTT)
  • Available Two-Speed Travel

HYDRAULIC

  • Boom Float with Detent
  • Pilot Proportional Hydraulic Controls
  • Pressure Relieving Flat Faced Coupler Body
  • Auxiliary Hydraulic Pump Flow 21.5 gal / min (81.0 L / min)

WORKING EQUIPMENT

  • Radial Boom Design
  • Mechanical Quick Coupler
  • Available Hydraulic Quick Coupler
  • Available 67” Smooth Lip Bucket (16.2 cu ft) (Narrow Wheel Position)
  • Available 72” Smooth Lip Bucket with Bolt-on Cutting Edge (17.8 cu ft)
  • Available Attachment Control Kit with 8 Pin Connector
  • Available Bolt-on Tooth Bar
  • Available 48” Pallet Forks 

OPERATOR'S STATION

  • Tilt-up Operator Station
  • Pilot Operated Joystick Controls
  • Rear Pivoting Seat Bar with Integrated Arm Rests
  • ROPS / FOPS Structure
  • 12 volt Power Outlet
  • Available Deluxe Suspension Seat
  • Available Pressurized Cab with Heat
  • Available Pressurized Cab with Air Conditioner and Heat
  • Available AM / FM / MP3 Radio with NOAA Weather Band

Specifications

OPERATING PERFORMANCE 
Loader Type Radial
Operating Weight 7,450 lbs (3,379 kg)
Tipping Load 3,987 lbs (1,808 kg)
Rated Operating Capacity 2,000 lbs (907 kg)
Bucket Breakout Force 5,500 lbs (2,494 kg)
Lift Arm Breakout Force 7,000 lbs (3,175 kg)
Traction Force 8,700 lbs (3,946 kg)
ENGINE  
Make/Model Perkins / 804D-33T, Turbocharged
Tier Rating EPA Interim Tier 4
Cylinder/Displacement 4 / 201 in³ (3.3 L)
Horsepower 74 hp (55 kW)
Rated Engine Speed 2,500 rpm
Maximum Torque 180 ft-lb (245 Nm)
Engine Lubrication 9.0 qts (8.5 L)
Cooling System 12.0 qts (11.0 L)
Fuel Tank Capacity 30.0 gal (113.0 L)
Electrical System 12 volts / 90 amps
DRIVE TRAIN  
Traction Drive Type Hydrostatic
Chain Case Bow Tie Drive System
Chain Size 100 ANSI
Wheel Size 12 x 16.5
Width Over Tires 72 in (1,829 mm)
Maximum Travel Speed  
     Single 8.5 mph (13.6 km / hr)
     Optional Two Speed  12.0 mph (19.3 km / hr)
HYDRAULIC SYSTEM  
Hydraulic Reservoir Capacity 10.0 gal (38.0 L)
Auxiliary Hydraulic Flow 21.5 gal/min (81.0 L / min)
Hydraulic System Pressure 3,335 psi (22.9 MPa)
DIMENSIONS  
Maximum Lift Height to Bucket Pin 10 ft 5 in (3,175 mm)
Dump Height Fully Raised 8 ft 5 in (2,570 mm)
Dump Reach Fully Raised 2 ft 1.2 in (640 mm)
Maximum Bucket Rollback at Ground 30°
Maximum Dump Angle Fully Raised 34°
Transport Length 11 ft 11.7 in (3,652 mm)
Machine Length 9 ft 1.5 in (2,782 mm)
Wheel Base 4 ft 0 in (1,242 mm)
Angle of Departure 25.4°
Ground Clearance 10.5 in (267 mm)
Overall Width - Wide Position 6 ft 0 in (1,828 mm)
Overall Width - Wheel Reversed 5 ft 6 in (1,676 mm)
Overall Height 7 ft 0 in (2,134 mm)