Takeuchi TL10

Compact Track Loaders TL10

Double tap to zoom

 

Features

Refined and capable, the TL10 is a great all-around performer.  It features excellent weight distribution making it ideally suited for a wide range of tasks on the jobsite.

ENGINE

  • EPA Interim Tier 4 compliant
  • Turbocharged engine
  • Automatic fuel-bleed system
  • Extended life coolant
  • Dual element air filter with pre-cleaner

ELECTRICAL

  • Electronic engine monitoring system
  • Fuel and coolant temperature gauge
  • 12 volt system with 80 amp alternator
  • Halogen worklights, front and rear
  • Engine preheat
  • Hour meter
  • Back-up alarm

UNDERCARRIAGE and FRAME

  • Permanently sealed track rollers with metal face seals
  • Welded track frame with multiple cross members
  • 2-speed travel
  • 17.7" rubber track with integrated steel cables and forged steel inserts
  • Grease type track adjuster

HYDRAULIC

  • Cushioned boom cylinders
  • Boom float with detent
  • Pilot proportional hydraulic controls
  • Pressure relieving flat faced coupler body
  • 14-pin connector with push button control
  • Hydraulic self leveling
  • Available high flow auxiliary hydraulics, 36 gpm
  • Available 2nd auxiliary circuit, 17 gpm
  • Available ride control
  • Available control pattern change valve

WORKING EQUIPMENT

  • Radial boom design
  • Mechanical quick coupler
  • Available Hydraulic quick coupler
  • Available 76" HD smooth lip dirt bucket (20.3 cu ft)
  • Available 76" HD dirt bucket with (8) teeth (20.3 cu ft)
  • Available 7' Six way dozer blade
  • Available HD 48" pallet forks and frame
  • Available Counterweight kit (575 lbs)

OPERATOR'S STATION

  • Tilt-up operator station
  • Pilot operated controls
  • Six-way adjustable suspension seat
  • Rear pivoting seat bar with integrated arm rests
  • Retractable seat belt
  • ROPS / FOPS structure
  • Available pressurized cab with roll-up door, air conditioning, heat, defrost, and wiper
  • Available 3" seat belt
  • Available 3 point seat belt
  • AM / FM / Mp3 radio with NOAA weatherband

Specifications

OPERATING PERFORMANCE
Operating Weight - Canopy 10,320 lb
Operating Weight - Cab 10,515 lb
Tipping Load 6,867 lb
ROC (SAE J818 standard 35% tipping load*) 2,403 lb
Operating Load at 50% of Tipping Load 3,434 lb
ROC w/ Optional Counterweight 2,723 lb
Bucket Breakout Force 7,400 lb
Lift Arm Breakout Force 7,425 lb
Traction Force 11,060 lb
Bucket Capacity (SAE Heaped) 20.3 cu ft
Cycle time  
    Raise-Full Load 4.6
    Lower-No Load 3
    Dump-Full Load 3
    Curl-No Load 2
*Operating capacity of track loaders to be rated according to SAE J818 at no more than 35% of the tipping load  
ENGINE  
Make / Model Kubota / V3800CRT
Tier Rating EPA Interim Tier 4
Cylinders / Displacement 4/230 cu in (3.8L)
Horsepower 92.0 hp (68.6 kW)
Rated / Max Engine Speed 2,400 rpm / 2,600irpm
Maximum Torque 247 ft-lb @ 1,500 rpm (335 Nm)
Engine Lubrication 13.9 qt (13.2 L)
Cooling System 16.4 qt (15.5 L)
Fuel Tank Capacity 23.8 gal (90 L)
Fuel Consumption (65% of full load) 3.35 gal / hr (12.7 L/hr)
Electrical System 12 volts / 80 amps
UNDERCARRIAGE  
Traction Drive Type Hydrostatic drive with double reduction planetary final drive
Parking Brake Spring applied, hydraulically released
Track Roller Type Permanently sealed rollers with precision metal face seals
Track Rollers 5 per side
Track Width 17.7 in (450 mm)
Track Ground Contact Length 4 ft 10.9 in (1,495 mm)
Ground Pressure - Canopy 4.4 psi (30.1 kPa)
Ground Pressure - Cab 4.5 psi (30.7 kPa)
Travel Speed - Low Range 4.6 mph (7.4 km/hr)
Travel Speed - High Range 7.2 mph (11.6 km/hr)
HYDRAULIC SYSTEM  
Hydraulic Reservoir Capacity 12.7 gal (48 L)
Hydraulic System Capacity 19.5 gal (74 L)
Auxiliary Hydraulic Flow 20 gal/min (75 L/min)
Auxiliary Hydraulic Flow - Optional High Flow 36 gal/min (137 L/min)
Auxiliary Hydraulic Flow - Optional 2nd Circuit 17 gal/min (64.5 L/min)
Hydraulic System Pressure 3,046 psi (21 MPa)
DIMENSIONS  
Front Clearance Radius without Bucket 4 ft 11.1 in (1,500 mm)
Rear Clearance Radius 5 ft 6.3 in (1,685 mm)
Angle of Departure 30 degrees
Maximum Lift Height to Bucket Pin 10 ft 2.5 in (3,120 mm)
Dump Height Fully Raised 7 ft 10.7 in (2,405 mm)
Maximum Dump Angle Fully Raised 38.5 degrees
Maximum Bucket Rollback at Ground Level 31 degrees
Reach Fully Raised 2 ft 10.4 in (875 mm)
Overall Width Without Bucket 5 ft 9.7 in (1,770 mm)
Recommended Bucket Width 76 in (1,930 mm)
Overall Height 7 ft 5.4 in (2,270 mm)
Overall Length (without bucket) 9 ft 9.7 in (1,770 mm)
Minimum Ground Clearance 12.8 in (325 mm)