Takeuchi TL12V2
Takeuchi TL12V2
Compact Track Loaders TL12V2
Overview:
The TL12V2 features a vertical lift loader arrangement and sets another benchmark for compact track loaders by delivering one of the most capable and innovative machines available to the market today. The cab has been enlarged and features a smooth low effort overhead door design for improved entry and egress. A quiet... + Read More
Features
ENGINE
- EPA Final Tier 4 Emission Compliant
- Turbocharged and Intercooled
- DOC+DPF+SCR Exhaust After Treatment
- High Pressure Common Rail Injection System
- Active Power Control Power Management System
- Selectable Work Modes - Power and ECO
- Dial Throttle Control
- Automatic Fuel Bleed System
- Extended Life Coolant
- High Capacity Radiator, Hydraulic Oil Cooler and Intercooler Mounted Side-by-Side on Swing Out Frame
- Duel Element Air Cleaner
ELECTRICAL
- 12 volt System with 80 amp Alternator
- Heavy Duty, Quick Access Battery
- LED Work Lights, Front and Rear
- 5.7" Color Multi-Informational Display with Rear Camera
- Sealed Rocker Switches
- Back-up Alarm
- Horn
UNDERCARRIAGE AND FRAME
- 17.7" Quiet Track Design with Wide Block Tread
- Long Track Frame
- Fully Welded Frame with Integrated Cross Members
- Rear Bumper Integrated into Frame
- Front and Rear Tie-Down and Lift Points
- Permanently Sealed Track Rollers with Metal Face Seals
- Double Reduction Planetary Drives
- 2 Speed Travel
OPERATOR'S STATION
- Pilot Operated Controls
- Deluxe High Back Adjustable Suspension Seat
- Rear Pivoting Seat Bar with Integrated Arm Rests
- ROPS/FOPS Structure
- Retractable 2" Seat Belt
- 3 Point Seat Belt (optional)
- FOPS Level 2 Roof Guard (optional High Flow)
- Polycarbonate Front Door (optional High Flow)
- Pressurized Cab with Roll-up Door, Air Conditioning, Heat, Defrost, Front/Rear Wiper and AM/FM/MP3 Radio (Cab Only)
HYDRAULIC & WORKING EQUIPMENT
- Vertical Lift Loader Design
- Heavy Duty Low Cross Member
- Cushioned Boom Cylinders
- Boom Float with Detent
- Hydraulic Pilot Controls
- Proportional Auxiliary Controls with Detent
- Pressure Relieving Flat Faced Coupler Body
- Hydraulic Self Leveling (ON/OFF)
- Mechanical Quick Coupler
- Hydraulic Quick Coupler (standard on cab units)
- 14-Pin Connector with Push Button Control (optional)
- Primary Flow Auxiliary Hydraulics 23.2 gpm
- High Flow Auxiliary Hydraulics 40.4 gpm (optional)
- Secondary Auxiliary Circuit 23.2 gpm (optional)
- Ride Control (optional)
- Control Pattern Change Valve (ISO or H) (optional)
Specifications
| OPERATING PERFORMANCE | |
| Operating Weight - Canopy | 12,705 lb |
| Operating Weight - Cab | 13,040 lb |
| Tipping Load | 11,737 lb |
| ROC (SAE J818 stabdard 35% tipping load*) | 4,107 lb |
| Operating Load at 50% of Tipping Load | 5,868 lb |
| Bucket Breakout Force | 7,874 lb |
| Lift Arm Breakout Force | 7,109 lb |
| Traction Force | 14,006 lb |
| Bucket Capacity (SAE Heaped) | 24 cu ft |
| Cycle time | |
| Raise-Full Load | 4 |
| Lower-No Load | 2.9 |
| Dump-Full Load | 3.1 |
| Curl-No Load | 2 |
| *Operating capacity of track loaders to be rated according to SAE J818 at no more than 35% of the tipping load | |
| ENGINE | |
| Make / Model | Kubota / V3800-TIF4B |
| Tier Rating | EPA Final Tier 4 |
| Cylinders / Displacement | 4/230 cu in (3.8 L) |
| Horsepower | 111.3 hp (83.0 kW) |
| Rated / Max Engine Speed | 2,400 rpm |
| Maximum Torque | 284 ft-lb (385 Nm) |
| Engine Lubrication | 13.9 qt (13.2 L) |
| Cooling System | 4.8 gal (18.0 L) |
| Fuel Tank Capacity | 32.7 gal (123.9 L) |
| Fuel Consumption (65% of full load) | 3.8 gal/hr (14.4 L/hr) |
| Electrical System | 12 volts / 80 amps |
| UNDERCARRIAGE | |
| Traction Drive Type | Hydrostatic drive with double reduction planetary final drive |
| Parking Brake | Spring applied, hydraulically released |
| Track Roller Type | Permanently sealed rollers with precision metal face seals |
| Track Rollers | 6 per side |
| Track Width | 17.7 in (450 mm) |
| Track Ground Contact Length | 67.6 in (1,717 mm) |
| Ground Pressure - Canopy | 4.8 psi (33.0 kPa) |
| Ground Pressure - Cab | 4.9 psi (33.9 kPa) |
| Travel Speed - Low Range | 5.0 mph (8.1 km/hr) |
| Travel Speed - High Range | 7.8 mph (11.8 km/hr) |
| HYDRAULIC SYSTEM | |
| Hydraulic Reservoir Capacity | 13.2 gal (50.0 L) |
| Hydraulic System Capacity | 24.8 gal (94.0 L) |
| Auxiliary Hydraulic Flow | 23.2 gal/min (88 L/min) |
| Auxiliary Hydraulic Flow - Optional High Flow | 40.4 gal/min (153 L/min) |
| Auxiliary Hydraulic Flow - Optional 2nd Circuit | 23.2 gal/min (88 L/min) |
| Hydraulic System Pressure (psi) | 3,481 psi (24 MPa) |
| DIMENSIONS | |
| Front Clearance Radius without Bucket | 5 ft 3.4 in (1,610mm) |
| Rear Clearance Radius | 6 ft 1.0 in (1,848 mm) |
| Angle of Departure | 29 degrees |
| Maximum Lift Height to Bucket Pin | 10 ft 10 in (3,299 mm) |
| Dump Height Fully Raised | 8 ft 1.0 in (2,459 mm) |
| Maximum Dump Angle Fully Raised | 46.8 degrees |
| Maximum Bucket Rollback at Ground Level | 32.0 degrees |
| Reach Fully Raised | 3 ft 0.4 in (924 mm) |
| Overall Width Without Bucket | 6 ft 5.2 in (1,960 mm) |
| Recommended Bucket Width | 80 in (2,032 mm) |
| Overall Height | 7 ft 9.7 in (2,381 mm) |
| Overall Length (with bucket) | 13 ft 3.3 in (4,045 mm) |
| Minimum Ground Clearance | 12.2 in (310 mm) |
